Universal aerosol acrylic glossy enamel. The colors of the enamel are selected in accordance with the European standard RAL.
Suitable for interior and exterior works.
It is designed for application on concrete, metal, wood, brick, stone and plastic surfaces.
METHOD OF APPLICATION:
- Pre-clean, dry, degrease, prime and sand the surfaces to be painted.
- Insert into the hole in the cap of a flat (slotted) screwdriver 7-10 mm wide. Turn the screwdriver a quarter of a turn, resting the slot on the rib of the cylinder. Do not insert the screwdriver too deeply so as not to damage the dome of the cylinder.
- For best results the enamel should be applied at a temperature not lower than +10°C.
- Shake the can vigorously for 2-3 minutes before use.
- The enamel should be applied without overflowing, from a distance of 25-30 cm in 2-3 layers with intermediate drying for ≈10 minutes. The drying time "on the stick" at a temperature of +20 ° C - 15-20 minutes. Time of complete drying at a temperature of +20 ° C - 2 hours.
Suitable for interior and exterior works.
It is designed for application on concrete, metal, wood, brick, stone and plastic surfaces.
METHOD OF APPLICATION:
- Pre-clean, dry, degrease, prime and sand the surfaces to be painted.
- Insert into the hole in the cap of a flat (slotted) screwdriver 7-10 mm wide. Turn the screwdriver a quarter of a turn, resting the slot on the rib of the cylinder. Do not insert the screwdriver too deeply so as not to damage the dome of the cylinder.
- For best results the enamel should be applied at a temperature not lower than +10°C.
- Shake the can vigorously for 2-3 minutes before use.
- The enamel should be applied without overflowing, from a distance of 25-30 cm in 2-3 layers with intermediate drying for ≈10 minutes. The drying time "on the stick" at a temperature of +20 ° C - 15-20 minutes. Time of complete drying at a temperature of +20 ° C - 2 hours.
